silo varnish

At a glance

  • contains high vacuum bitumen (HVB)
  • ring and ball softening point: 100 °C
  • the solvent is purified and phenol-free
  • no contamination of the forage with coating residues (as it will not stick to the varnish)
  • provides a non-sticky surface
  • resistant to forage acids
  • food-safe, therefore suitable for drinking water reservoirs
  • consumption: approx. 1 litre per 5 m² for two coatings
  • apply evenly using paint brush/roller (drying time approx. 1 hour); use white spirit for cleaning, surface must be dry and clean
  • mix varnish with white spirit or universal thinner if you‘re using airless sprayers
  • spray test area to determine the right mixture resp. the nozzles and pressure required

available as 200 litre barrel or 30 litre bucket

This might also be of interest to you ...